Binance API code -1013 msg - Filter failure: PRICE_FILTER

While implementing the Binance API, we might get the following error.

{
"code":-1013,
"msg":"Filter failure: PRICE_FILTER"
}

This might be due to the mismatch of the given Filter for the price by Binance. As from the Binance Spot Api documentation, the condition that needs to be satisfied is

price >= minPrice
price <= maxPrice
price % tickSize == 0

We can get the Filter value for PRICE_FILTER as below.

For BTC USDT:

https://api.binance.us/api/v3/exchangeInfo?symbol=BTCUSDT

OR

https://api.binance.com/api/v3/exchangeInfo?symbol=BTCUSDT

The output of the above endpoint is:

{
   "timezone":"UTC",
   "serverTime":1657086978303,
   "rateLimits":[
      {
         "rateLimitType":"REQUEST_WEIGHT",
         "interval":"MINUTE",
         "intervalNum":1,
         "limit":1200
      },
      {
         "rateLimitType":"ORDERS",
         "interval":"SECOND",
         "intervalNum":10,
         "limit":100
      },
      {
         "rateLimitType":"ORDERS",
         "interval":"DAY",
         "intervalNum":1,
         "limit":200000
      },
      {
         "rateLimitType":"RAW_REQUESTS",
         "interval":"MINUTE",
         "intervalNum":5,
         "limit":6100
      }
   ],
   "exchangeFilters":[
      
   ],
   "symbols":[
      {
         "symbol":"BTCUSDT",
         "status":"TRADING",
         "baseAsset":"BTC",
         "baseAssetPrecision":8,
         "quoteAsset":"USDT",
         "quotePrecision":8,
         "quoteAssetPrecision":8,
         "baseCommissionPrecision":8,
         "quoteCommissionPrecision":8,
         "orderTypes":[
            "LIMIT",
            "LIMIT_MAKER",
            "MARKET",
            "STOP_LOSS_LIMIT",
            "TAKE_PROFIT_LIMIT"
         ],
         "icebergAllowed":true,
         "ocoAllowed":true,
         "quoteOrderQtyMarketAllowed":true,
         "allowTrailingStop":false,
         "cancelReplaceAllowed":false,
         "isSpotTradingAllowed":true,
         "isMarginTradingAllowed":false,
         "filters":[
            {
               "filterType":"PRICE_FILTER",
               "minPrice":"0.01000000",
               "maxPrice":"100000.00000000",
               "tickSize":"0.01000000"
            },
            {
               "filterType":"PERCENT_PRICE",
               "multiplierUp":"5",
               "multiplierDown":"0.2",
               "avgPriceMins":5
            },
            {
               "filterType":"LOT_SIZE",
               "minQty":"0.00000100",
               "maxQty":"9000.00000000",
               "stepSize":"0.00000100"
            },
            {
               "filterType":"MIN_NOTIONAL",
               "minNotional":"10.00000000",
               "applyToMarket":true,
               "avgPriceMins":5
            },
            {
               "filterType":"ICEBERG_PARTS",
               "limit":10
            },
            {
               "filterType":"MARKET_LOT_SIZE",
               "minQty":"0.00000000",
               "maxQty":"29.33387056",
               "stepSize":"0.00000000"
            },
            {
               "filterType":"MAX_NUM_ORDERS",
               "maxNumOrders":200
            },
            {
               "filterType":"MAX_NUM_ALGO_ORDERS",
               "maxNumAlgoOrders":5
            }
         ],
         "permissions":[
            "SPOT"
         ]
      }
   ]
}

For PRICE_FILTER:

{
               "filterType":"PRICE_FILTER",
               "minPrice":"0.01000000",
               "maxPrice":"100000.00000000",
               "tickSize":"0.01000000"
            },

Lets look into the first condition; price >= minPrice price <= maxPrice

We need to have a price that must be greater or equal to min price and less than or equal to the max price.

Let's look into the second condition: price % tickSize == 0; For this, we might get the precision issue if we don't parse the price. Here, tickSize is in the 2 decimal place so we need to parse the price in 2 decimal places to validate the filter. This will help resolve the issue.

Read More

Binance Api code-1013 msg:Filter failure: MIN_NOTIONAL

This is a quick tutorial on how we can resolve the Filter failure: MIN_NOTIONAL

While using Binance API, when placing the order and calling API we might get the following error.

{
"code":-1013,
"msg":"Filter failure: MIN_NOTIONAL"
}

As described on binance spot API documentation, The MIN_NOTIONAL filter defines the minimum notional value allowed for an order on a symbol. An order's notional value is the price * quantity

Now let's look into what is the required values for MIN_NOTIONAL. We can get it from the exchange info endpoint as below

For BTC USDT

https://api.binance.us/api/v3/exchangeInfo?symbol=BTCUSDT

The Output for the above endpoint is:

{
   "timezone":"UTC",
   "serverTime":1657007585516,
   "rateLimits":[
      {
         "rateLimitType":"REQUEST_WEIGHT",
         "interval":"MINUTE",
         "intervalNum":1,
         "limit":1200
      },
      {
         "rateLimitType":"ORDERS",
         "interval":"SECOND",
         "intervalNum":10,
         "limit":100
      },
      {
         "rateLimitType":"ORDERS",
         "interval":"DAY",
         "intervalNum":1,
         "limit":200000
      },
      {
         "rateLimitType":"RAW_REQUESTS",
         "interval":"MINUTE",
         "intervalNum":5,
         "limit":6100
      }
   ],
   "exchangeFilters":[
      
   ],
   "symbols":[
      {
         "symbol":"BTCUSDT",
         "status":"TRADING",
         "baseAsset":"BTC",
         "baseAssetPrecision":8,
         "quoteAsset":"USDT",
         "quotePrecision":8,
         "quoteAssetPrecision":8,
         "baseCommissionPrecision":8,
         "quoteCommissionPrecision":8,
         "orderTypes":[
            "LIMIT",
            "LIMIT_MAKER",
            "MARKET",
            "STOP_LOSS_LIMIT",
            "TAKE_PROFIT_LIMIT"
         ],
         "icebergAllowed":true,
         "ocoAllowed":true,
         "quoteOrderQtyMarketAllowed":true,
         "allowTrailingStop":false,
         "cancelReplaceAllowed":false,
         "isSpotTradingAllowed":true,
         "isMarginTradingAllowed":false,
         "filters":[
            {
               "filterType":"PRICE_FILTER",
               "minPrice":"0.01000000",
               "maxPrice":"100000.00000000",
               "tickSize":"0.01000000"
            },
            {
               "filterType":"PERCENT_PRICE",
               "multiplierUp":"5",
               "multiplierDown":"0.2",
               "avgPriceMins":5
            },
            {
               "filterType":"LOT_SIZE",
               "minQty":"0.00000100",
               "maxQty":"9000.00000000",
               "stepSize":"0.00000100"
            },
            {
               "filterType":"MIN_NOTIONAL",
               "minNotional":"10.00000000",
               "applyToMarket":true,
               "avgPriceMins":5
            },
            {
               "filterType":"ICEBERG_PARTS",
               "limit":10
            },
            {
               "filterType":"MARKET_LOT_SIZE",
               "minQty":"0.00000000",
               "maxQty":"29.33387056",
               "stepSize":"0.00000000"
            },
            {
               "filterType":"MAX_NUM_ORDERS",
               "maxNumOrders":200
            },
            {
               "filterType":"MAX_NUM_ALGO_ORDERS",
               "maxNumAlgoOrders":5
            }
         ],
         "permissions":[
            "SPOT"
         ]
      }
   ]
}

For MIN_NOTIONAL:

{
               "filterType":"MIN_NOTIONAL",
               "minNotional":"10.00000000",
               "applyToMarket":true,
               "avgPriceMins":5
            },

So this defines that the limit order placed must be minimum of $10 i.e price * quantity = total here, the total must be at least 10. If this doesn't satisfy then we will get the mentioned error. So the condition must be satisfied while calling the API.

Read More

Vue.js How to get query parameter from URL

In this tutorial, we are going to learn how we can get the query parameter from URL.

let's look into the sample example.

http://360learntocode.com?username=test

Using Vue Router:

Here, we want to get the username query parameter. In Vue.js there is an elegant way to get query parameters. If we are using the router then we can get the parameter inside the vue.js component as below.

let username =  this.$route.query.username

Which gives the username value. Another way to get parameters with the router is

let username = this.$route.params.username

Using Javascript URLSearchParams :

We can use URLSearchParams() method which helps to work with the query string of the URL. We can use this inside our vue.js component methods as below.

 methods: {
    getUsername() {
      const queryString = window.location.search;
      if (queryString) {
        const urlParams = new URLSearchParams(queryString);
      	if (urlParams.has('username')) {
          return urlParams.get('username');
        }
      }
      return "";
    }
  }

Or

 methods: {
    getUsername() {
      const queryString = window.location.href;
      if (queryString) {
      	let urlString = queryString.split('?')[1]
        const urlParams = new URLSearchParams(urlString);
      	if (urlParams.has('username')) {
          return urlParams.get('username');
        }
      }
      return "";
    }
  }

Read More

Error: Could not find or load main class org.grails.cli.GrailsCli

This is a quick tutorial on how we can resolve the issue on the Grails project.

For grails application sometimes we might get the following error

Error: Could not find or load main class org.grails.cli.GrailsCli

This might be due to the removal of some dependencies or libraries from the application. Sometimes, while loading multiple applications from IDE while downloading the library for a particular project other libraries for another project might remove so this kind of error might occurs for that project.

Let's first delete the build folder under the application.

Now, let's refresh the Gradle project. Here we are using IntelliJ Idea, we can refresh the project as below

After refreshing the project it will download the missing dependencies. Then run the application which will resolve the problem.

We can also try cleaning the application.

If we are using the command line then type the following command to clean the application.

grails clean

If we are using the IntelliJ idea then Ctr+Alt+G opens the command window and use the following command.

clean

Now, re-run the app. This will help resolve the issue.

Read More

Error while importing mysql dump sql file Unknown collation: utf8mb4_0900_ai_ci

This is a quick tutorial on how we can resolve the issue while importing the MySQL dump SQL file. Sometimes due to the incompatibility of the MySQL version, the following error might occurs

ERROR 1273 (HY000): Unknown collation: 'utf8mb4_0900_ai_ci'

Before resolving the issue, make sure to back up the dump SQL file

sudo cp sql_file_name.sql sql_file_name_backup.sql 

In order to resolve this issue, we are going to replace the collation utf8mb4_0900_ai_ci with the valid collation utf8_general_ci. For this open, the SQL file with vim or vi and hit Shift + : and add the following replace command and hit enter.

%s/utf8mb4_0900_ai_ci/utf8_general_ci/g

The above command will find each occurrence of 'utf8mb4_0900_ai_ci' (in all lines), and replace it with 'utf8_general_ci'.

Now lets change the CHARSET=utf8mb4 to CHARSET=utf8

%s/utf8mb4/utf8/g

Make sure to hit enter after each command.

Now save the file by Shift+: and type wq!

After the changes, import the dump SQL file which supposes to work fine.

Read More

How to add external jar or library on IntelliJ IDEA project

In this tutorial, we will learn how to add external jar files to the project and load it using Intellij Idea.

Load Jar for Simple Java Application:

Let's create a directory called libs under the project root directory and add all the external libraries. Now we need to load those Jar files using Intellij Idea.

In Intellij, click on >> File >> Project Structure or hit Ctrl + Alt + Shift + s. This will open the popup window to load library.

Note: Select the New project library as Java in step 2 as shown in the figure.

Then click ok to load the libs folder module and click on Apply and Ok. Now we can access the Jar from our java classes.

Loading Jar/Library from Gradle Project:

Add the following inside dependencies in build.gradle file.

dependencies {
//other dependencies
 
compile fileTree(dir: 'libs', include: '*.jar')
}

After that in IntelliJ idea you can see the Gradle on the right side, click on it and refresh the Gradle project as below:

Loading Jar/Library from Maven Project:

Add the following system dependency inside pom.xml file.

<dependency>
           <groupId>com.libName</groupId>
           <artifactId>lib-artifact</artifactId>
           <version>20220117</version>
           <scope>system</scope>
           <systemPath>${basedir}/libs/jar_file_name.jar</systemPath>
       </dependency>

Make sure to change the group id, artifact id, and system path.

After that from the IntelliJ idea on the right side, you can see the Maven click on it and refresh the project by clicking the project name as below.

Read More

How to deploy the war file on remote tomcat server

In this tutorial, we are going to learn basic steps to deploy our war file to the tomcat server.

Create a war file:

First, create a war file, this will depend upon the framework used, each framework will provide the command to create a war file. The war file will contain the extension with .war.

Connect to remote server:

Now, let's connect to a remote server where we want to deploy to war file. Here we are SSH connection to the server

If you are using a server password to connect using the following command

sudo ssh server_username@ip_address

Here use your server username and server IP address to connect. For example ubuntu@34.344.56

If you are using a .pem file or other private keys to connect to a server then use the following command

sudo ssh -i path_to_pem_file server_username@ip_address

Download tomcat on the remote server:

Once ssh to a remote server, let's download the tomact server where we will deploy our war file.

Here, we are using tomcat 8 so will download the same.

sudo wget https://dlcdn.apache.org/tomcat/tomcat-8/v8.5.81/bin/apache-tomcat-8.5.81.tar.gz

Extract the file

sudo tar xvzf apache-tomcat-8.5.81.tar.gz

Here, generally, we put the extracted tomcat server under /opt directory of the system.

In this tutorial, we are not using tomcat GUI to make it simple for set up. so let's remove the unnecessary folder from the tomcat server.

sudo rm -r apache-tomcat-8.5.81/webapps/*

Copy war file to remote server:

Now, let's copy the war file to deploy.

sudo scp path_to_war/war_file_name.war server_username@ip_address:~

This will copy the war file into the home directory of the remote server. If you are using .pem file or other private keys then use the following command to copy the war file.

sudo scp -i path_to_pem_file path_to_war/war_file_name.war server_username@ip_address:~

Once the war file is copied and moved to the remote server then, ssh to the remote server if not ssh.

Deploy War file:

First, give sufficient permission for copied war file

sudo chmod 555 war_file_name.war

Copy war file to the webapps directory of our tomcat server

sudo mv war_file_name.war /opt/apache-tomcat-8.5.81/webapps/ROOT.war

Note: make sure that you should copy the war file as ROOT.war inside webapps directory

Install Java:

Tomcat server requires java to run. So let's install java; here, we are using OpenJDK 8 using the following command.

sudo apt-get install openjdk-8-jdk

Confirm the installation

java -version

We can see the similar output

openjdk version "1.8.0_312"
OpenJDK Runtime Environment (build 1.8.0_312-8u312-b07-0ubuntu1~20.04-b07)
OpenJDK 64-Bit Server VM (build 25.312-b07, mixed mode)

Run the Tomcat server:

First, navigate to the tomcat directory and use the below command to run the tomcat server

cd /opt/apache-tomcat-8.5.81/
sudo sh bin/startup.sh

If the tomcat server is running successfully then you are supposed to see the output similar as below

Using CATALINA_BASE:   /opt/apache-tomcat-8.5.81
Using CATALINA_HOME:   /opt/apache-tomcat-8.5.81
Using CATALINA_TMPDIR: /opt/apache-tomcat-8.5.81/temp
Using JRE_HOME:        /usr
Using CLASSPATH:       /opt/apache-tomcat-8.5.81/bin/bootstrap.jar:/opt/apache-tomcat-8.5.81/bin/tomcat-juli.jar
Using CATALINA_OPTS:   
Tomcat started.

See the logs of tomcat:

Once Tomcat is running successfully, we need to verify whether the war file is running as expected or not

sudo tail -f logs/catalina.out

This will give the last log file lines; if you want to specify how many lines to view then replace f with e.g 1000 to see the 1000 lines log.

Stop the Tomcat server:

sudo sh bin/shutdown.sh

If the app is running fine, you can open the application using the public IP address or with the domain name if pointed to that IP address.

http://example.com:8080

Or

http://124.56.234:8080

Here, the tomcat server will run with port 8080 by default.

Change the port 8080 to 80:

Under server.xml you can find the following tag.

change the above XML tag as below:

Here, we are changing the port from 8080 to 80 and 8443 to 443. By doing so, if your domain running with port 8080 i.e example.com:8080, now it will open with port 80 i.e example.com. If you type your domain in the browser then you can run it with both HTTP and HTTPS i.e http://example.com and https://example.com.

Save the server.xml file and re-run the tomcat server by first stopping it.

Read More

Create Mysql User and Grant Privileges

In this tutorial, we are going to learn how we can create MySQL users and grant privileges to that users.

For MySQL installation please follow the tutorial, Install Mysql Specific Version on Ubuntu.

Create MySQL User:

Before creating a new user we need to first log in with the root user, for this, use the following command.

mysql -u username -puserpassword

Here, username is the root user's username and userpassword is the root user's password, use your root user's username and password.

Now, let's create the user

CREATE USER 'username'@'localhost' IDENTIFIED BY 'password';

Replace the username with your desired new user name and password as desired strong password. Here we are using localhost as we are considering the MySQL setup from the same server, if it is for the remote server then use IP address of host/server as below.

CREATE USER 'username'@'ip_address' IDENTIFIED BY 'password';

For this created user, they can access the database from that server not remotely. If we want to create user that can connect from any server or machine as below.

CREATE USER 'username'@'%' IDENTIFIED BY 'password';

Grant Privileges:

The general syntax for grant privileges is

GRANT <privileges_type> ON <database_table> TO 'username'@'localhost';

Let's look into some examples

Grant all privileges to user for all database

GRANT ALL PRIVILEGES ON *.* TO 'username'@'localhost';

Here, *.* will grant for all databases, and "ALL PRIVILEGES" will grant all the privileges

Grant all privileges to the user for a particular database

GRANT ALL PRIVILEGES ON database_name.* TO 'username'@'localhost';

database_name.* will grant all privileges for all the tables of that database with the database name "database_name"

Grant all privileges to user for a particular database table

GRANT ALL PRIVILEGES ON database_name.table_name TO 'username'@'localhost';

We can do database query-specific privileges like Insert, Delete, Create, Drop, Select, Update, etc. For example

GRANT INSERT ON *.* TO 'username'@'localhost';

Here, the user can insert rows into tables for all the databases but can't do other operations like drop, create, update, etc.

Flush Privileges:

After we change the user privileges we need to flush it to reflect the changes. We can do so using following command

FLUSH PRIVILEGES;

Revoke Privileges:

We can revoke the grant privileges for the user as below

REVOKE <privileges_type> ON <database_table> FROM 'username'@'localhost';

Remove User:

We can remove the MySQL user as well by using the following command

DROP USER 'username'@'localhost';

Read More

Install Mysql Specific Version on Ubuntu/Linux using debian package

In this tutorial, we are going to install MySQL version 5.7 using the Debian package(.deb)

Step 1. Add the MySQL Apt Repository

First download the Debian(.deb) package from MySQL Apt Repo. Here we are using the wget to download as below:

wget https://dev.mysql.com/get/mysql-apt-config_0.8.12-1_all.deb

Step 2. Configure the .deb file

sudo dpkg -i mysql-apt-config_0.8.12-1_all.deb

You can see the below prompt screen

If somehow we are unable to see the prompt screen then either dpkg is interrupted or broken. Use the below command to clean the config after that use the previous dpkg command, now we can see the screen

apt-get purge mysql-apt-config

Select the ubuntu bionic option and the second screen will pop up as below. Now select the first option to select the MySQL version

Now select the desired version of MySQL, Here we are selecting the MySQL 5.7

Once selected the desired version of MySQL then select ok to configure.

Now the configure suppose to get successful and we can see the output as below:

Selecting previously unselected package mysql-apt-config.
(Reading database ... 36242 files and directories currently installed.)
Preparing to unpack mysql-apt-config_0.8.12-1_all.deb ...
Unpacking mysql-apt-config (0.8.12-1) ...
Setting up mysql-apt-config (0.8.12-1) ...
Warning: apt-key should not be used in scripts (called from postinst maintainerscript of the package mysql-apt-config)
OK

Step 3. Install the MySQL Server

Now update the MySQL repository

sudo apt-get update

Install the MySQL using the following command:

sudo apt install -f mysql-client=5.7* mysql-community-server=5.7* mysql-server=5.7*

If you chose the latest version of MySQL then no need to specify the package.

Next, the screen will pop up to enter the root password. Enter the password and press ok. After that MySQL is installed and running successfully. Test the MySQL version and MySQL status by using the below command:

mysql --version
sudo systemctl status mysql

Step 4. Secure MySQL Installation

Use the following command to secure MySQL installation:

sudo mysql_secure_installation

Enter your MySQL root password and answer all of the security questions.

Now, log in using the root credential

mysql -u root -p

Step 5. Create a New Mysql User

Before creating new users we need to first log in with the root user as mentioned above. Now, create the user using the following command:

CREATE USER 'username'@'localhost' IDENTIFIED BY 'password';

Here, use your own username and password and localhost as we are working on the same machine.

For example:

CREATE USER 'testuser'@'localhost' IDENTIFIED BY 'testpassword';

If we want to create a user that can be connected from any machine then use the following command

CREATE USER 'username'@'%' IDENTIFIED BY 'password';

Now, let's grant the permission to the newly created user.

GRANT ALL PRIVILEGES ON *.* TO 'testuser'@'localhost';

Here, user have full access to the database with ALL PRIVILEGES and for all the databases as we are using *.*

However, we can grant privileges for specific databases as

GRANT ALL PRIVILEGES ON database_name.* TO 'testuser'@'localhost';

After grant privileges to user, we need to flush the privileges

FLUSH PRIVILEGES;

We can revoke privileges using the following command:

GRANT ALL PRIVILEGES ON *.* TO 'testuser'@'localhost';

Remove User:

DROP USER 'testuser'@'localhost';

Step 6: Some commands for MySQL server:

Stop the MySQL server:

sudo systemctl stop mysql

Start the MySQL server:

sudo systemctl start mysql

Check the status of MySQL server:

sudo systemctl status mysql

Restart MySQL server

sudo systemctl restart mysql

Step 7: Completly remove/uninstall MySQL server

sudo apt-get remove --purge mysql*
sudo apt-get autoremove
sudo apt-get autoclean

Read More

How to use SiftingAppender in Gradle Groovy project

 In this tutorial, we are going to set up the SiftingAppender in our Gradle Groovy project.

Sifting Appender is useful when we want to separate the log files during runtime i.e if we want to separate the log files per thread or per user session basis.

Unfortunately, in the Gradle Groovy project, SiftingAppender is no longer supported since version 1.0.12 as mentioned in Groovy Configuration.

Let's look into the simple example where we are going to configure the SiftingAppender in logback.groovy, where we want to configure the per-user logging mechanism.

import ch.qos.logback.classic.PatternLayout
import ch.qos.logback.classic.sift.MDCBasedDiscriminator
import ch.qos.logback.classic.sift.SiftingAppender

appender("USER_ROLLING", SiftingAppender) {
    discriminator(MDCBasedDiscriminator) {
        key = 'userid'
        defaultValue = 'NONE'
    }
    sift {
        appender("FILE-${userid}", FileAppender) {
            file = "Path-to-log/${userid}.log"
            append = true
            layout(PatternLayout) {
                pattern = "%level %logger - %msg%n"
            }
        }
    }
}
logger("package-to-log",TRACE,['USER_ROLLING'], false)

This is a simple example SiftingAppender configuration; this is derived from logback sifting appender xml configuration.

We are using the Mapped Diagnostic Context for mapping the context user to create a separate file. We can do a similar for the thread as well.

Let's set up the MDC for user, the sample example looks as below.

import groovy.util.logging.Slf4j
import org.slf4j.MDC
@Slf4j
class UserLogging {

    public static void debug(String message, String userid = '') {
        setUserMDC(userid)
        log.debug(message)
    }

    public static void error(String message, String userid = '') {
        setUserMDC(userid)
        log.error(message)
    }

    public static void info(String message, String userid = '') {
        setUserMDC(userid)
        log.info(message)
    }

    public static void setUserMDC(String userid) {
        try {
            if (!userid) {
                MDC.remove("userid")
                return
            }
            MDC.put("userid", userid)
        }catch(e) {
            log.error("Error setting user Mapped Diagnostic Context due to "+e.getMessage())
        }
    }
}

Here, if the userid is available then we are setting the MDC for userid so the log file can be written in a separate file per user. If you want to do with request user do the similar in filter class or the place where it suits.

Now, if we run the application we will get the error as a result the appender doesn't work. So, here we found the solution project that extends Logback Gaffer so that SiftingAppender can be configured in Groovy DSL from this Github repo.

Simply download the jar file for that project and add it to the application.

For the Gradle project create a libs directory under the project directory and load and compile from build.gradle file.

Under build.gradle under dependencies{} section:

compile fileTree(dir: 'libs', include: '*.jar')

If we run the application it suppose to work. The log file will be created on the respective file path.

Read More